T24Studio
Service area · Los Angeles County

Title 24 reports for Burbank permits.

Burbank is one of the few cities that writes its energy submittal spec down — naming the compliance software by version, on its own pre-approved ADU correction list.

Local plan check

A city that names the compliance software

Most cities ask for “Title 24 calcs” and leave it there. Burbank’s BPAP (pre-approved ADU) Plan Check Correction List, dated 01/2026, has a Section Q for energy: a complete calculation by performance or prescriptive method, with forms “CF-1R and MF-1R must be reproduced on the drawings and signed by the Designer or Owner and the Document Author.” It names the engines too — “either Energy Pro 9.4.0 or CBECC-Res 2025.1.0” — with digital signatures from both parties. The pre-approved ADU page adds that reports must be registered on CHEERS.org and the CF-1R run at All Orientation, and spells out the solar math: a 250 sf solar zone, no PV required below 1.8 kWdc.

That specificity matters because the clock is long. Plan check runs through ProjectDox, where a first-time applicant can’t self-register — an invitation is issued after the application is emailed in. First review runs up to eight weeks, rechecks two to four. Corrections arrive in one batch only after every department has finished, with no uploads before then, so one weak energy set costs a month. Even an over-the-counter HVAC change-out is listed twice on the Tier 1 list with “energy report required.” Burbank is a single climate zone — CZ 9 citywide — and unlike neighboring Glendale it has no CEC-approved local energy ordinance.

One thing that doesn’t change by city: my price and turnaround are flat statewide — $99 first report, $150 flat after, 24–48 hours on your first job. What differs city to city is what happens on the plan-check side before and after the CF1R lands in your permit set, which is what this page covers.

Rates

Prices

Flat fees, in writing before I start. No hourly, no bid package, no change-order games — the number on the quote is the number on the invoice.

New client offer

Your first report with me

$150$9924–48 hours

One per client, homes under 3,000 square feet. Full energy model, CF1R and CHEERS registration. It’s a test run — send one job and see how it goes.

Every model after the first

$150Per model

The standard rate once you’re a client — the second building, ADU plus main house, the next project that walks in. Back in 3 business days.

Over 3,000 square feet

QUOTED

Quoted from the plans before any work starts, same day.

24×36 plan-sheet set

$20

Your CF1R laid out full size, matched to your drawing set. Comes back as a PDF you drop straight in.

Revisions

FREEFirst two

Two revisions included, plus questions any time. Past two I quote first, before I touch it.

Commercial / tenant improvement

QUOTEDSame day

Send the plans and you’ll have a flat quote back the same day. No deposit, no minimum.

Disclosure

One honest note

I’m not a licensed engineer or architect, and I don’t stamp drawings. On the CF1R I’m the documentation author — you stay the responsible designer. Nothing about your role on the job changes.

That’s on purpose. I’m not after your scope or your clients. I do one piece of the permit set — the piece that usually holds it up — and I do it fast.

Questions

Burbank plan-check questions

If yours isn’t here, see the full FAQ or call and ask.

How long does Burbank plan check take?
The city publishes a number: first review by Building and Safety can take up to eight weeks, and rechecks two to four weeks. Other departments run their own clocks, and the city notes time frames for solar and ADUs may vary. Corrections come in a single batch only once every department has finished, and nothing can be re-uploaded until then.
Does Burbank say which energy software it accepts?
For its pre-approved ADU program, yes. The BPAP plan check correction list dated 01/2026 states that performance method calculations must be done in either Energy Pro 9.4.0 or CBECC-Res 2025.1.0, with digital signatures from the document author and the designer or owner, and CF-1R and MF-1R reproduced on the drawings themselves.
What is CHEERS registration, and is it extra?

California requires the compliance certificate to be registered with an approved data registry before the building department will accept it. I use CHEERS, and registration is included in the rate — no separate registry fee, no account you have to open.

Does my ADU or addition actually need one?

Almost certainly. New conditioned floor area — ADUs, JADUs, garage conversions, additions — triggers Title 24. So do alterations that touch the envelope, the ductwork, or the HVAC equipment, including a straight change-out. A remodel that only moves non-structural interior partitions usually doesn’t.

Send it either way. If it doesn’t need a report I’ll say so and there’s no charge for the look.

Send your Burbank plans.

The CF1R comes back CHEERS-registered and signed on both lines, so the energy section isn't what sends the job into another eight-week cycle.